Format: 1.8
Date: Mon, 22 May 2023 12:42:14 -0600
Source: linuxcnc
Architecture: source
Version: 1:2.8.4.66.gf6c36b9f3
Distribution: buster
Urgency: low
Maintainer: Sebastian Kuzminsky <seb@highlab.com>
Changed-By: LinuxCNC Buildmaster <buildmaster@buildbot.linuxcnc.org>
Changes:
 linuxcnc (1:2.8.4.66.gf6c36b9f3) buster; urgency=low
 .
   * docs: fix a misnamed function in halmodule docs
   * g-code.txt: Minor typos spotted when reading docs
   * Merge pull request #2479 from LinuxCNC/fix-2386-task-motion-race
   * fix a race in communication between Task and Motion
   * motion: fix indentation & comment, no behavior change
   * Merge pull request #2459 from LinuxCNC/fix-more-mb2hal-test-variability
   * mb2hal test: remove signal timing requirement
   * Merge pull request #2458 from LinuxCNC/fix-mb2hal-shutdown-segfaults
   * mb2hal: wait for threads to stop before deallocating the memory they're
       using
   * Merge pull request #2456 from LinuxCNC/fix-mb2hal-tests-on-rtai
   * mb2hal tests: accept any comp id
   * Merge pull request #2452 from LinuxCNC/2.8-github-ci
   * halcompile test needs sudo for --install
   * fix halcompile test to work both rip and installed
   * fix github ci for 2.8
   * gpg: add public part of linuxcnc deb archive signing key to our keyring
   * Fix using -dumpfullversion for old compilers and clang
   * docs: fix image gmoccapy/settings/hardware
   * message: Update HAL component docs to match behavior
   * Merge pull request #2296 from LinuxCNC/halcompile-permissions
   * build system: turn off x bits on .so files for uspace rt comps
   * tests: verify that halcompile installs files with correct permissions
   * docs: fix example in halmodule
   * Merge pull request #2288 from LinuxCNC/hm2-bspi-fixes
   * mesa-7i65: add a few comments
   * mesa-7i65: fix a bug with stale data in fifo
   * hostmot2 bspi: add hm2_bspi_clear_fifo()
   * hostmot2 bspi: add a comment about read fifos
   * hostmot2 bspi: sanity-check that channel echo enable matches receive
       buffer present
   * Merge pull request #2274 from hansu/add-mb2hal-tests
   * add test for mb2hal version 1.0
   * Merge pull request #2248 from LinuxCNC/interpmodule-speed-type-2.8
   * interpmodule: add interpreter.active_spindle property
   * add a test that uses remap to introspect about interpreter spindle state
   * fixup remap stdglue, interpreter.speed is an array now
   * fixup remap docs, interpreter.speed is an array now
   * fix remap/gettings-started config: speed is a tuple, not a float
   * interpmodule: fix `speed` property
   * Configs: Fix configs with multiple HOME = per joint.
   * toolchanger test: oops, forgot to wait for status buffer to update
   * Merge pull request #2181 from smoe/2.8
   * src:usr_intf language name typos
   * Update pncconf.py
   * Merge pull request #2172 from petterreinholdtsen/i2gc-url
   * Fix obsolete link to documentation in image-to-gcode(1).
   * Merge pull request #2167 from hansu/fix-mb2hal-pin-names
   * mb2hal: fix error when PIN_NAMES > 5
   * Merge pull request #2147 from
       petterreinholdtsen/debian-unstable-testing-supported
   * Merge pull request #2153 from adamlouis/2.8-fix-get-program
   * return PROGRAM NONE if no program is open
   * Adjusted scripts/platform-is-supported to not fail on Debian Testing and
       Unstable.
   * githelper.sh: New master glob
   * qtvcp -cam_align panel: add window size setting option
   * Merge pull request #2120 from hansu/issue-2111
   * gmoccapy: update release notes
   * gmoccapy: fixed sensitizing of user tab button (#2111)
   * Fix broken download link in Gmoccapy docs
   * Getting Started: Update checksums (en, es, cn)
   * Merge pull request #2069 from zz912/patch-11
   * Add firmware 7i96d_1pwm for 7i96 for PNCconf
   * docs: Bump the version number in the install docs
   * Merge branch '2.8' of github.com:LinuxCNC/linuxcnc into 2.8
   * Merge pull request #2057 from hansu/gmoccapy-fix-missing-startup-code
   * Fix the changelog syntax
   * gmoccapy: fix error on creating file when RS274NGC_STARTUP_CODE is not
       set
   * gmoccapy: updated changelog
Checksums-Sha1:
 d5883ef304e8e0790bfa0a4010be834b11b1ef14 1977 linuxcnc_2.8.4.66.gf6c36b9f3.dsc
 780837be7b8d84668161acdb9b801e749ea0f59b 66200020 linuxcnc_2.8.4.66.gf6c36b9f3.tar.xz
 58dbd99368ec8c1ea45c4da22ccace769590d411 21061 linuxcnc_2.8.4.66.gf6c36b9f3_source.buildinfo
Checksums-Sha256:
 8cadd3059aa52ad0242c08b585e4dd67933fa05635094dcd90b89f0e8a2b8f47 1977 linuxcnc_2.8.4.66.gf6c36b9f3.dsc
 3ff086b1419d2ab2deb89303b03c2b3e5469284e4fed9b2c21cc873b53fdc447 66200020 linuxcnc_2.8.4.66.gf6c36b9f3.tar.xz
 2b3c0f907500ff223534b8bc14b60b5f0f59a6d278d1fb08e489175a2fd62522 21061 linuxcnc_2.8.4.66.gf6c36b9f3_source.buildinfo
Files:
 6d2ad2472645400240caf627a81249c0 1977 misc optional linuxcnc_2.8.4.66.gf6c36b9f3.dsc
 baec2dbdf18e2906030d97cdaa475f82 66200020 misc optional linuxcnc_2.8.4.66.gf6c36b9f3.tar.xz
 b45c20da248ec96a666b63dd0c6da64d 21061 misc optional linuxcnc_2.8.4.66.gf6c36b9f3_source.buildinfo