Format: 1.8 Date: Tue, 18 Jul 2023 09:43:32 -0600 Source: linuxcnc Binary: linuxcnc-uspace-dev linuxcnc-uspace linuxcnc-doc-en linuxcnc-doc-fr linuxcnc-doc-es linuxcnc-doc-cn linuxcnc-doc-ja Architecture: source Version: 1:2.8.4.76.g6082f1df7 Distribution: stretch Urgency: low Maintainer: Sebastian Kuzminsky Changed-By: LinuxCNC Buildmaster Description: linuxcnc-doc-cn - motion controller for CNC machines and robots (Chinese linuxcnc-doc-en - motion controller for CNC machines and robots (English documentat linuxcnc-doc-es - controlador de movimiento para máquinas CNC y robots (Español). linuxcnc-doc-fr - motion controller for CNC machines and robots (French documentati linuxcnc-doc-ja - motion controller for CNC machines and robots (Japanese linuxcnc-uspace - motion controller for CNC machines and robots linuxcnc-uspace-dev - PC based motion controller for real-time Linux Changes: linuxcnc (1:2.8.4.76.g6082f1df7) stretch; urgency=low . * docs: Unbreak docs building after mistakes adding new file * hal_pi_gpio: Default to assuming that the pin-out is supported * Issue #1232: Apparently caused by an attempt by Axis to reinstate G96 mode on file reload, without the mandatory S-word. * Fix for issue 2530 G95, G96 and G97 with a $ to choose spindle all seem to work, but the validity check was wrong, and was rejecting the commands erroneously. * Merge pull request #2541 from petterreinholdtsen/docs-g30-typo * Corrected typo in G30 description (i->1). * Fix generating HTML index of manpages * docs: update how to connect pins of GladeVCPs * Merge pull request #2526 from petterreinholdtsen/2.8-motion-man-pin-names * Corrected pin names and formatting of motion(9) man page * docs: fix a misnamed function in halmodule docs * g-code.txt: Minor typos spotted when reading docs * Merge pull request #2479 from LinuxCNC/fix-2386-task-motion-race * fix a race in communication between Task and Motion * motion: fix indentation & comment, no behavior change * Merge pull request #2459 from LinuxCNC/fix-more-mb2hal-test-variability * mb2hal test: remove signal timing requirement * Merge pull request #2458 from LinuxCNC/fix-mb2hal-shutdown-segfaults * mb2hal: wait for threads to stop before deallocating the memory they're using * Merge pull request #2456 from LinuxCNC/fix-mb2hal-tests-on-rtai * mb2hal tests: accept any comp id * Merge pull request #2452 from LinuxCNC/2.8-github-ci * halcompile test needs sudo for --install * fix halcompile test to work both rip and installed * fix github ci for 2.8 * gpg: add public part of linuxcnc deb archive signing key to our keyring * Fix using -dumpfullversion for old compilers and clang * docs: fix image gmoccapy/settings/hardware * message: Update HAL component docs to match behavior * Merge pull request #2296 from LinuxCNC/halcompile-permissions * build system: turn off x bits on .so files for uspace rt comps * tests: verify that halcompile installs files with correct permissions * docs: fix example in halmodule * Merge pull request #2288 from LinuxCNC/hm2-bspi-fixes * mesa-7i65: add a few comments * mesa-7i65: fix a bug with stale data in fifo * hostmot2 bspi: add hm2_bspi_clear_fifo() * hostmot2 bspi: add a comment about read fifos * hostmot2 bspi: sanity-check that channel echo enable matches receive buffer present * Merge pull request #2274 from hansu/add-mb2hal-tests * add test for mb2hal version 1.0 * Merge pull request #2248 from LinuxCNC/interpmodule-speed-type-2.8 * interpmodule: add interpreter.active_spindle property * add a test that uses remap to introspect about interpreter spindle state * fixup remap stdglue, interpreter.speed is an array now * fixup remap docs, interpreter.speed is an array now * fix remap/gettings-started config: speed is a tuple, not a float * interpmodule: fix `speed` property * Configs: Fix configs with multiple HOME = per joint. * toolchanger test: oops, forgot to wait for status buffer to update * Merge pull request #2181 from smoe/2.8 * src:usr_intf language name typos * Update pncconf.py * Merge pull request #2172 from petterreinholdtsen/i2gc-url * Fix obsolete link to documentation in image-to-gcode(1). * Merge pull request #2167 from hansu/fix-mb2hal-pin-names * mb2hal: fix error when PIN_NAMES > 5 * Merge pull request #2147 from petterreinholdtsen/debian-unstable-testing-supported * Merge pull request #2153 from adamlouis/2.8-fix-get-program * return PROGRAM NONE if no program is open * Adjusted scripts/platform-is-supported to not fail on Debian Testing and Unstable. * githelper.sh: New master glob * qtvcp -cam_align panel: add window size setting option * Merge pull request #2120 from hansu/issue-2111 * gmoccapy: update release notes * gmoccapy: fixed sensitizing of user tab button (#2111) * Fix broken download link in Gmoccapy docs * Getting Started: Update checksums (en, es, cn) * Merge pull request #2069 from zz912/patch-11 * Add firmware 7i96d_1pwm for 7i96 for PNCconf * docs: Bump the version number in the install docs * Merge branch '2.8' of github.com:LinuxCNC/linuxcnc into 2.8 * Merge pull request #2057 from hansu/gmoccapy-fix-missing-startup-code * Fix the changelog syntax * gmoccapy: fix error on creating file when RS274NGC_STARTUP_CODE is not set * gmoccapy: updated changelog Checksums-Sha1: 2948ac8fcc58de2af0397c714097570b13795cb4 1810 linuxcnc_2.8.4.76.g6082f1df7.dsc cdbad9c261ff1ad04ccf731470095ad5a32be7b6 66205628 linuxcnc_2.8.4.76.g6082f1df7.tar.xz 61c51ed301f0dabd443cf5ac05baa111e38b7711 18728 linuxcnc_2.8.4.76.g6082f1df7_source.buildinfo Checksums-Sha256: 688a0bbd71fccb66789772a5ec2b8fe53be95a921d9040286dc4932eda9d7dd7 1810 linuxcnc_2.8.4.76.g6082f1df7.dsc 37197e3cc0829c81b55091668e2c86d77374a35017049adc9218e998ea482f7c 66205628 linuxcnc_2.8.4.76.g6082f1df7.tar.xz c63fa4a40b948c4781a980f968fa5d3e4529e0a5ddaa3cd091a7f2e538313a48 18728 linuxcnc_2.8.4.76.g6082f1df7_source.buildinfo Files: 09f243ca3f04feac9b4942be6415db29 1810 misc optional linuxcnc_2.8.4.76.g6082f1df7.dsc eda378d0980824c6994d9cc42b562e5d 66205628 misc optional linuxcnc_2.8.4.76.g6082f1df7.tar.xz b1263b0dad5dc5b90310c9455ef5c603 18728 misc optional linuxcnc_2.8.4.76.g6082f1df7_source.buildinfo